PP Pleated Filter Cartridge
The Alpha-Pure PP Pleated Filter Cartridges are designed to handle high efficiency filtration requirements. They are constructed of pleated melt blown filter media for removal rating from 0.1 to 100 microns. The high surface area ensures longer service life and low initial pressure drops. The hardwares of the element are made of high purity polypropylene materials for use in critical conditions. All the cartridges are manufactured and assembled in a clean room environment to minimize any possibilities of contamination. The Alpha-Pure filter cartridges are available in a wide range of configurations and can be fitted in most filter housings.
| Feature |
| Excellent chemical compatibility. |
| Suitable for filtering organic solvents and acid bases. |
| Pleated design for increased surface area. |
| Low pressure loss and longer service life. |
| Retention rating from 0.1 to 100 microns. |
| Graded pore density for higher dirt holding capacity. |
| Rigid polypropylene outer cage protects filter media. |
| Manufactured from materials, which are FDA listed for food contact application in title 21 of U.S. code of Federal Regulations. |
| Cartridges are free of binders, resins, and adhesives. |
Specifications
Dimensions (nominal) :
Outside Diameter : 2.7” (69 mm)
Lengths : 9.75" (24.8 cm), 10" (25.4 cm), 19 1⁄2" (49.5 cm), 20" (50.8 cm),
29 1⁄4" (74.3 cm), 30" (76.2 cm), 39" (99.1 cm), 40" (102 cm)
Materials of Construction
Filter Element : Polypropylene
Hardware : Polypropylene
Support / Drainage : Polypropylene
Sealing : Thermal Bond
Gaskets / O-Rings : Silicone Elastomer, Nitrile, EPDM, NBR, Viton, Teflon, TEV,
E-FKM
|
Application
| Pre-filtration for RO System |
| Solvents, Selected Acids & Lyes |
| Chemical & Petrochemical Industries |
| Semiconductor & Microelectronics |
| Paints, Coatings and Plating Solutions |
